Luke’s Ultralight Rain Jacket – 4.87 OZ!!

There are many reasons to own a great rain jacket, not just the rain. With this on mind, I set out get a rain jacket that meets three criteria:

  • It needs to be light.
  • It needs to be non-breathable.
  • It needs to be reasonably priced.

Enter Luke’s Ultralight.

Luke makes a range of rain jackets, from E-vent to Silpoly. It’s the Silpoly that caught my attention. It’s light, cheap and non-breathable. Just what I wanted. Let me do some explaining here, as I want a jacket for more than just rain. This will also be a vapor barrier. The vapor barrier will be part of my sleep system, and my insulation system in general. So really I view this more as the top layer to my insulation system, with added rain blocking benefits.

For a vapor barrier to work the material must, of course, be non-breathable, so I opted for the Silpoly Ultralight Rain Shell with pit zips. I must say the stitching here is top-notch, the jacket is made very well.

Ultralight Rain Jacket

Ultralight Rain Jacket

I bought this jacket to work with my umbrella as well. On my Nine Line hike, I had a very wet and just misty day. That’s me in the last picture, the little flash of silver is my umbrella. It was raining steadily, although not super hard. I was wearing my Marmot wind jacket, the DWR couldn’t hang and it just wet out from the elbows down, freezing my arms. The rest of me was warm as wind jackets are excellent insulators. So my immediate thought was waterproof sleeves, but the more I thought about that the more needlessly complicated it seemed.

When looking for a solution I emailed Luke to talk about his SilPoly Rain Jacket, and it became evident that this was a great solution.

First off this is, for me, the pinnacle of what I wanted. It’s simple, inexpensive, light, and well made. Some Rain jackets can cost nearly $500 and weigh half a pound!!! That’s crazy to me and one of the main reasons I never bought one. Also, this jacket has a bunch of little details that make it evident that Luke really put some thought into the design.

The hood has an adjuster at the base of the neck, to pull the brim of the hood down and forward on the head, and it really can tighten up the top of the hood so the wind doesn’t lift it up and then blow it back. Second is the one hand waist adjuster. It’s anchored at one side to allow you to cinch up the bottom so the wind doesn’t get up your back or front. The hood is also stiffened with a 4” piece of soft, flexible foam, and it does a good job of forming a small brim, like a short baseball cap. It zips all the way up on the front, with a waterproof #3 YKK zipper, that hasn’t bound up on me yet after 3 months of use.

It packs up about the size of my coffee cup, in fact, I think I can fit in my coffee cup. It’s tiny. I find this to be so small that I will take it with me even on trail runs with no forecast of precipitation, just in case. It packs up about the size of my coffee cup, in fact, I think I can fit it in my coffee cup. It’s tiny.

Something that I noticed at first that threw me off is that the pit zips look like they don’t cover all of the armpit, but are really just upper arm zips.

Ultralight Rain Jacket

Let me assure you that when your arm is down it is in the right place. I suspect that the placement is for ease of installation, as it is right along a seam.

The view from the back, as you can see the rain jacket is decent abrasion-resistant the black spot on my shoulder is from a fall, and the adjustment at the back of the head is pretty small and light.Ultralight Rain Jacket

All in all this is a great jacket if you understand that it is NOT breathable, and can perform triple duty as a vapor barrier, wind blocker and rain jacket. The only time I wouldn’t take this with me is if the weather was going to be hot and rainy. Then my poncho would be my rain gear of choice, as no waterproof/breathable jacket is really good at either as of yet.

Likes:

  • It’s SUPER light at 4.87 OZ.
  • It’s a great price.
  • Very well designed.
  • Working with Luke is very easy.
  • Works great as an insulator.
  • Works great as a wind jacket.

Dislikes:

  • You need to wear long sleeves under the jacket or you get soaked in sweat. But this is expected with this fabric.
  • It wouldn’t work well in the heat and wet, all the sweat would drown you. But that’s why ponchos exist.

Support Milehikeguys.com. If you make a purchase after clicking on the links above, a portion of the sale helps support this site at no additional cost to you. Also, I bought this item with my own funds, and was under no obligations.

The 26g BRS-3000T gas stove review

When I did the Etekcity stove review, a few people on Reddit’s r/Ultralight asked why I didn’t get the BRS-3000T. Well I knew the Etekcity was reliable and the difference between 26g and 83g isn’t that huge to me. But because every one was on about it, I got one.

On Amazon at least, it seems this stove, the BRS-3000T has a few different names. I ended up getting this one, even though there were others at a few different ends of the price spectrum. Because this one had some good reviews, and it was prime eligible. Also it’s the same thing.

Starting off, the weight on the BRS-3000T is very good. As I said 26g is pretty light.

On the freedom side it’s 0.90 ounces.


And now the fuel.


After the boil.

In the 3:40 the BRS-3000T took to boil the 71F water, it used 9 grams of fuel. That’s 10-11 boils per 100 gram canister. The Etekcity used 7 grams and boiled at 3:15 on average in my tests. But it also weighs over twice as much.

In the video below I point out a few things, namely the wind effect and the size of the flame. I suspect that the BRS-3000T would be better on a little larger pot than the Snow Peak 600. Like an Evernew posta pot or an MSR Titan. I’m going to try all these with my Jetboil pot soon just to see what happens so maybe it’ll be better then, in the mean time a quick pro/con.

Pro:

-It’s super light. 26g is nothing to sneeze at. It might blow away.

-The efficiency isn’t too bad. I’m sure there are worse stoves out there, 9g per boil is better to calculate too.

Con:

– It does use more than the Etekcity, and more than my MiniMo, which uses around 5g per boil. There are much more efficient stoves out there, but they are generally much heavier and are a part of a system.

– The stove is slower to boil than either of my other rocket stoves.

– The pot stand arms on the BRS-3000T are kinda hard to get into position. you have to stand them all upright, then click them down. Not a really big deal, but kinda annoying.

Please don’t forget to sign up for our email list so you can be notified of new posts!

 

Support Milehikeguys.com. If you make a purchase after clicking on the links above, a portion of the sale helps support this site at no additional cost to you.

The Best Ultralight Trowel for only $5

OK OK OK. I know everyone likes the Deuce of Spades, but this is seriously my best DIY I’ve ever done, with the Funnel being the possible exception. Don’t worry the funnel how to is upcoming. This Ultralight Trowel is really light at 24g (0.84 OZ) and really easy to make. And even though the Deuce is only 0.6OZ it’s about four times the cost of this if you already have the hacksaw and sandpaper.

Ultralight Trowel
IT’S RALLY LIGHT!!

What you will need:

One set of Stainless steel tongs (this makes 2) – like these.

A Hacksaw or other metal cutting device – like this one.

Some sandpaper – this is good.

Take the tongs and measure out what you feel is a reasonable amount of handle after the lobster part, and mark it. This is the handle and the lobster part is the business end. It should be obvious.

I left 2.5 inches. I feel like that’s average, right?

Ultralight Trowel
That is 2.5 Inches Long

Cut the trowel off at the mark you made with the hacksaw. If you have a bench vise it works great to hold the trowel while you cut it. After you cut it off use some sandpaper to smooth off the edges where you cut it. Then it’s a Ultralight Trowel.

Once that is done, so are you! Now go take a hike.

Support Milehikeguys.com. If you make a purchase after clicking on the links above, a portion of the sale helps support this site at no additional cost to you.